Hollow Wall Anchor
Hollow Wall Anchor
Description
Suitable Substrates
- Hollow block
- Hollow floor slab
- Hollow brick
- Plasterboard
Product Advantages
- Flush finish low profile head
- Large flange prevents pull into base material
- Anti rotation barbs prevent spinning in the hole
- Can be set with a setting tool or by using a screwdriver for smaller sizes
- 5 expansion legs give full support (M5 and M6)
- Expanded by special tool or screwdriver
Specification
Anchor for hollow base materials. For correct setting use the setting tool to ensure that the legs collapse fully, to spread the load over a wide area.
Material
Pressed steel body - Zinc plated 5pm.
Machined screw - Zinc plated 5pm
Applications
- Bathroom fixtures
- Kitchen fixtures
- Shelving brackets
- Ceiling fixtures
Installation
1. Drill the recommended sized hole through the material then tap the anchor into the hole until it is flush with the surface
2.Attach anchor setting tool to screw and expand the anchor. Small sizes may be set using a screwdriver
3. Remove the screw and place through the hole in the fixture then back into the hollow wall anchor and tighten the screw.
Data
| Product Range - Hollow Wall Anchor |
| Eurocode |
Code |
Screw Size |
Wall Thickness |
Max Fixture Thickness |
Anchor/Hole Diameter |
Box Qty |
| 920671 |
6715 |
M4 x 25 |
0 - 5mm |
8mm |
8mm |
100 |
| 920672 |
6720 |
M4 x 45 |
8 - 16mm |
16mm |
8mm |
100 |
| 920673 |
6725 |
M4 x 50 |
16 - 23mm |
17mm |
8mm |
100 |
| 920674 |
6729 |
M5 x 45 |
6 - 13mm |
17mm |
10mm |
100 |
| 920675 |
6730 |
M5 x 60 |
8 - 16mm |
26mm |
10mm |
100 |
| 920676 |
6735 |
M5 x 70 |
16 - 32mm |
26mm |
10mm |
100 |
| 920677 |
6740 |
M6 x 60 |
7 - 16mm |
30mm |
13mm |
100 |
| 920678 |
6745 |
M6 x 70 |
16 - 32mm |
26mm |
13mm |
100 |
| Hollow Wall Anchor Indicative Laods in 12mm Plasterboard |
| Anchor
Ø (mm) |
Tensile Load (kN) |
Shear Load (kN) |
| M4 |
0.10 |
0.14 |
| M5 |
0.18 |
0.23 |
| M6 |
0.29 |
0.34 |
|
